Samsung Galaxy S10 series is getting the new update which is August 2019 security patch. Recently, Samsung has started rolling out the latest official update via OTA for Samsung Galaxy S10e, S10, and S10+. The most recent update comes with build number FXXS3ASH1 along with the latest August 2019 security patch. The security update comes with lots of new features and many bug fixes. The Samsung Galaxy S10 series comes with better hardware and amazing design.
The new update is an incremental update or security patch, which improves your device’s performance and fix bugs. The update is still based on Android Pie. Here in this article, we share a simple step by step guide on how to download and install August 2019 security patch for Galaxy S10. The weight of the update is about 112 MB in size.
Samsung rolling out the August 2019 security patch via OTA (over-the-air), soon will release all over the world. You can check the update first manually by going to Settings » Software update menu on the phone. If you have not yet received the new update then follow the given guide to flash August 2019 update file.
You can download the update form given below link and install it on your Samsung Galaxy S10 device with the help of Odin tool. Odin is a tool which is developed by Samsung officially. Odin allows users to flash the official firmware on Samsung devices. We highly recommend keeping updated your device to the latest official security patches. If you wish to download and install August 2019 security patch for Galaxy S10e, S10, and S10+, then go ahead and follow the given instructions.
This guide containing the August 2019 security patch firmware and instructions can be used only with the Galaxy S10. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device by navigating to Settings > About Phone.
AndroidBlog.gs will not responsible for any damage occurred to your Samsung Galaxy S10 during or after the installation of August 2019 security patch Proceed at your risk.
- Make a proper backup of all the existing data and settings of your Galaxy S10, in case anything goes wrong then you’ll be able to restore your data back.
- Verify that you’ve correctly installed the Galaxy S10 USB Drivers on the PC.
- Enable USB Debugging Mode on your Galaxy S10 by navigating to Settings > Developer Options > check the USB Debugging option.
- If you have a custom ROM installed on the phone, then after installing this stock update, it will be lost.
- The stock version will replace the custom recovery.
- If the Galaxy S10 will no longer belong to a rooted version, once the stock firmware installed.
- Check the battery level of your Galaxy S10, and it should be charged at least about 80% before proceeding to the installation guide.
How to Flash Official Update August 2019 security patch For Galaxy S10 :
1: – First, download Galaxy S10 August 2019 security patch official update and Odin v3.10.7 for Galaxy S10 on the desktop of your PC.
2: – Now, extract the archived contents to get the tar.md5 update file. Don’t extract the tar.md5 firmware update file.
3: – Turn OFF your Galaxy S10 to boot into Download Mode.
4: – Turn the device ON by pressing and holding the Volume Down + Home+ Power keys at the same time for a while till the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.
5: – Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.
6: – One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.
7: – Select the firmware files tar.md5 that you want to flash on your Galaxy S10. (Already extracted in Step No 1)
Click on ‘AP’ and select file with ‘AP’ in its name.
Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
8: – In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.
9: – Click on the Start button in Odin to initiate the installation process. It will take a few minutes.
10: – Once the installation process is successfully finished, the Galaxy S10 will restart. Unplug the phone after you see the home screen.
Done! These were the simple steps to download and install August 2019 security patch for Galaxy S10.
Let us know in the comments area below if you have any issues or questions regarding the above guide.