In this guide we will show you how to disable or bypass DAA and SLA authentication on Oppo devices. Nowadays, many of the users look towards what a phone has to offer in terms of custom development. Even though there are rumors that Mediatek devices are not as active players as Snapdragon devices in this regard, they are not entirely true. There are some devices with which you do not get much options in the custom development field, but that is not the case with Oppo devices. There are a lot of tweaks you can carry out on your Oppo device which proves that there are many MTK devices that are active in custom development.
As soon as the Kernel source code of a device is released, countless options of custom binaries and modifications open up for the device. These include installing custom ROMs, installing a custom recovery such as TWRP and even rooting the device using Magisk. But all of these tweaks and modifications also pose risks. If you do not perform any of these tweaks or flashing process correctly, you could end up with a bricked device. In case you end up with a hard bricked device, the only way out is to flash the stock firmware files back onto their respected partition by using a third party software such as SP Flash tool.
As we mentioned, if you ever end up getting your device bricked, you can always flash stock firmware back on to your device and bring it back to normal working condition. But the introduction of DAA and SLA authentication has made this task very difficult. You can not flash custom ROM back on to your device without bypassing the authentication. But there is useful way in which you can work around this issue. So in this guide, we will show you how to disable or bypass DAA and SLA authentication on Oppo devices and bring your bricked devices back to normal working condition.
What are DAA and SLA Authentication?
Many devices from various brands ship their devices with a locked bootloader in order to prevent users from flashing unofficial ROMs and removing the stock firmware. But still, users have the option to deviate from the stock ROM by unlocking the bootloader of the device. But when you end up with a bricked device, you do not get such options to flash firmware on your device. Coupled with that, the introduction of Download Agent Authentication and Serial Link Authentication make it even more difficult for users to unbrick their device. Why do these authentications make it harder for them?
The function of these two authentications is to only allow authorized users to flash or install any firmware on to bricked devices. These security protocols perform an authentication check by matching the decrypted string with the user account. If the users account does not match with the verified Oppo account, the flashing process is immediately stopped by BROM. But now you do not need to sweat over it as it is now possible to disable or bypass DAA and SLA authentication on Oppo devices and in the section below, we will be discussing just that, so read on for further instructions.
How to Disable or Bypass DAA and SLA Authentication on Oppo Devices
STEP 1: First of all, you to download and configure Mediatek drivers on your PC.
STEP 2: After that, you are required to download the latest version of Python on your PC. Once it is downloaded, open up the setup and then follow the instructions provided on screen to install it on your PC.
STEP 3: Open the directory where Python is installed and then type in cmd in the search bar and follow by pressing Enter. The Command Prompt will automatically pick up Python’s installation directory.
STEP 4: After that, type in the following command in the command window:
python -m pip install pyusb pyserial json5
STEP 5: Once done, you have to download the libusb-win32-devel-filter file. Once it is downloaded, launch the setup file and then follow the instructions provided on screen to completely install it on your computer. These drivers are important because they will help your computer identify your Oppo device that is connected to your computer and work properly with it, eventually allowing you to bypass DAA and SLA authentication on your Oppo device.
STEP 6: After the LIB Win32 tool has been installed, open it up. After that, head over to the driver section and then select MediaTek USB Port from the list that appears and then press on install.
STEP 7: Once the driver has been installed connect your device to your PC using a USB cable, while holding the Volume Up key of your device as well.
STEP 8: Then you are required to download the Oppo Bypass Tool. Once done, extract the file to any convenient location on your PC and then proceed to the bypass folder. Now you will see the brom.bat file inside it. Double click on it in order to launch it.
STEP 9: After that, you are required to download and install the SP Flash Tool on your PC. As soon as the installation is complete, you can launch it by running the flash_tool.exe file.
STEP 10: When the tool has been launched, go to options. You can use the Ctrl+Shift+O shortcut key to go immediately.
STEP 11: Now you are required to select the Connections tab from the menu you see on your left and then you have to select UART under Connection Settings.
STEP 12: So that is it! With this, you can disable or bypass DAA and SLA authentication on Oppo devices.
On this note, we conclude our guide on how to disable or bypass DAA and SLA authentication on Oppo devices. We hope that you found this guide helpful. Let us know what you think in the comment section below.