Download One UI, Android Pie Update For Galaxy Tab S4

Here is how to download and install One UI, Android Pie Update For Galaxy Tab S4. Recently Samsung kickoff the Android Pie update for Samsung Galaxy Tab S4. The T-Mobile started rolling out the new update Android Pie for Galaxy Tab S4.

Fortunately, the Sprint customers have updated Android Pie for Galaxy Tab S4 official update. As with Android Pie update, Galaxy Tab S4 includes Samsung’s updated One UI user interface like Galaxy S9 and Note 8 smartphone. Samsung has launched the Galaxy Tab S4 in August 2018 with Android Oreo out of the box. Now the wait is over and it is time to upgrade your device to the latest Android Pie OS.

Here we share the step by step guide on how to download and install Android Pie for Galaxy Tab S4 official firmware. The Android Pie for Galaxy Tab S4 official update comes with lots of new features and it is skinned with Samsung’s One UI interface.

The One UI brings some new features such as extend battery life when you’re running low, a Night mode that’s easier on the eyes in the evening, support for HEIF images, new Adaptive Battery optimization tool and much more. Also, the update comes with many other improvements and customizations. The Android Pie for Galaxy Tab S4 official update is currently available in the USA.

The new update Android Pie for Galaxy Tab S4 is available across all Sprint Galaxy Tab S4 tablets and it has been granted stable status. Nowadays Samsung releasing very fast Android Pie update for his flagships devices. Most of the Samsung devices which are running Android Oreo are finally receiving Android 9.0 Pie update. If you are interested in installing the Android Pie for Galaxy Tab S4, then go ahead and follow the given steps.

Note:

This guide containing the Official Android Pie firmware and instructions can be used only with the Galaxy Tab S4. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device by navigating to Settings > About Phone.

Galaxy Tab S4 Wi-Fi-only (SM-T830)

Galaxy Tab S4 LTE (SM-T835)

AT&T Galaxy Tab S4 (SM-T837A)

Sprint Galaxy Tab S4 (SM-T837P)

T-Mobile Galaxy Tab S4 (SM-T837T)

Verizon Galaxy Tab S4 (SM-T837V)

U.S. Cellular Galaxy Tab S4 (SM-T837R4)

Warning:

AndroidBlog will not responsible for any damage occurred to your Samsung Galaxy Tab S4 during or after the installation of Android Pie Proceed at your risk.

Pre-Requirements:

• Make a proper backup of all the existing data and settings of your Galaxy Tab S4, in case anything goes wrong then you’ll be able to restore your data back.
• Verify that you’ve correctly installed the Galaxy Tab S4 USB Drivers on the PC.
• Enable USB Debugging Mode on your Galaxy Tab S4 by navigating to Settings > Developer Options > check the USB Debugging option.
• If you have a custom ROM installed on the phone, then after installing this stock update, it will be lost.
• The stock version will replace the custom recovery.
• If the Galaxy Tab S4 will no longer belong to a rooted version, once the stock firmware installed.
• Check the battery level of your Galaxy Tab S4, and it should be charged at least about 80% before proceeding to the installation guide.

Required Files:

• Download ODIN v3.10.7

How to Flash Sprint Official Update Android Pie For Galaxy Tab S4 :

1: – First, download Galaxy Tab S4 Android Pie update Android Pie official update and Odin v3.10.7 for Galaxy Tab S4 on the desktop of your PC.

2: – Now, extract the archived contents to get the tar.md5 update file. Don’t extract the tar.md5 firmware update file.

3: – Turn OFF your Galaxy Tab S4 to boot into Download Mode.

4: – Turn the device ON by pressing and holding the Volume Down + Home+ Power keys at the same time for a while till the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.

5: – Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.

6: – One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.

7: – Select the firmware files tar.md5 that you want to flash on your Galaxy Tab S4. (Already extracted in Step No 1)

Click on ‘AP’ and select file with ‘AP’ in its name.

Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.

Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.

Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.

8: – In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.

How to Install Odin On Windows 7/8/10

9: – Click on the Start button in Odin to initiate the installation process. It will take a few minutes.

10: – Once the installation process is successfully finished, the Galaxy Tab S4 will restart. Unplug the phone after you see the home screen.

Done! These were the simple steps to download and install  Android Pie for Galaxy Tab S4.

Let us know in the comments area below if you have any issues or questions regarding the above guide.

SOURCE: SAMMOBILE