Havoc OS released the latest custom firmware which is based on Android 10 for Nokia 7 Pro. Now you can download and install the Havoc OS Android 10 custom firmware on your Nokia 7 Pro smartphone. The Havoc OS is a new custom ROM provider that is designed as Lineage OS. The Havoc OS custom ROM brings lots of new features, customizations, and improvements. Also, the ROM brings some aftermarket and enhanced features.
If you are the user of the Nokia 7 Pro and waiting for the Android 10 OS, then the wait is over. Here are the instructions on how to download and install the Android 10 for Nokia 7 Pro via Havoc OS custom ROM. Nokia released Nokia 7 Pro mid-range budget smartphone with Android 8.1 Oreo OS and later upgraded to Android 9.0 Pie OS. So before the official release of Android 10, you can use this amazing custom ROM. The stock firmware is good but custom ROM gives you some advanced, unique features and more customizations.
After flashing the Havoc OS ROM, you can get the experience of Android 10 OS and enjoy all the features on your device. To install Havoc OS Android 10 for Nokia 7 Pro, your device should have an unlocked bootloader and must have TWRP custom recovery already installed. The Havoc OS ROM brings many new features such as System-wide Rounded UI, Spectrum support, new gesture navigation, improved privacy, location control, and much more.
All credit goes to the XDA Senior member Raghu Varma, for sharing this amazing custom ROM. The ROM is a stable build and smoothly run on your device. If you wish to download and install Havoc OS Android 10 for Nokia 7 Pro, then go ahead and follow the given instructions.
The Havoc OS Android 10 custom ROM and the instructions given in this guide are working only for the Nokia 7 Pro. Check the model number of your Nokia 7 Pro from Settings > About Phone.
- Create a proper backup of all your existing data and settings on the phone before proceeding to the installation guide using a recommended custom recovery.
- Enable USB Debugging Mode on the Nokia 7 Pro by navigating to Settings > Developer Options.
- Verify that you’ve correctly installed the Nokia 7 Pro USB Drivers on the PC.
Steps to Flash Havoc OS Android 10 For Nokia 7 Pro Custom ROM:
Step No 1: – First, download Havoc OS Android 10 custom ROM for Nokia 7 Pro on the desktop of the PC.
Step No 2: – Plug your device into the PC using its USB data cable and mount its USB memory storage.
Step No 3: – Transfer Havoc OS Android 10 ROM .zip file which you’ve already downloaded from the above links to the root folder of your SD card on the phone.
Step No 4: – Unplug the Nokia 7 Pro from the PC and power it OFF to boot into Recovery Mode.
Step No 5: – Power ON the device while pressing and holding Volume Up + Home + Power buttons at the same time to enter into Recovery Mode.
Step No 6: – While your device is now in CWM Recovery, perform wipe data/factory reset, wipe cache partition and wipe Dalvik cache also by navigating to Advanced > Wipe Dalvik Cache.
Note: – wipe Dalvik cache will help you to prevent boot loops and other errors while ROM installation.
Step No 7: – Go back to the main Recovery Menu and choose to install zip from SD card → choose zip from sd card.
Step No 8:- Navigate to the Android 10 custom ROM .zip file, which you’ve already transferred to the SD card of your device previously. Select the ROM .zip file using the Power button and confirm the installation to begin.
Step No 9:-Tap on reboot bootloader
Step No 10:- Now, your device will boot into bootloader mode.
Step No 11:- Open the command window and flash ROM using this command given below.
Step No 12:- for slot-a >
fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
Step No 13:- for slot-b>
fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
Your Nokia 7 Pro will be rebooted and may take about 4 to 5 minutes to boot for the first time after installation.
Done! You’ve successfully installed the latest Havoc OS Android 10 for Nokia 7 Pro custom ROM.