Update Galaxy Note 3 (SM-N900) to Android 5.0 Lollipop

Note: – Please note that this tutorial is applicable if you have a Samsung Galaxy Note 3 N900 Exynos model only. Do not attempt installing this firmware on any other device. Otherwise, it may permanently damage or brick your device.

Warning:

AndroidBlog will not be held responsible in case anything goes wrong to your device during or after the updating process on the Galaxy Note 3. Proceed at your risk.

Pre-Requirements:

• Take a proper backup of all your valuable data on the Galaxy Note 3 such as contacts, SMS, apps, and app data with CWM or TWRP recovery installed.
• Download and install the USB drivers for your Note 3 from this link
• Enable USB Debugging your Galaxy Note 3 by going to Settings > Developer options
• Your Galaxy Note 3 must be:
  • SIM unlocked
  • Bootloader unlocked
  • Rooted with CWM or TWRP recovery
• Ensure that you have more than 80% battery charge left on your Galaxy Note 3.

Required Files:

• Android 5.0 Lollipop for Galaxy Note 3 SM-N900 (Leaked)
• TWRP 2.8.1.0
• Bootloader 5.0 + Stock Recovery
• CWM recovery
• SuperSU 2.40.zip
• Download Odin

Note: To extract TWRP-LRX21V.N900XXUEBNL4-samsungviet.vn.zip use Password: samsungviet.vn

Steps to Update Galaxy Note 3 (SM-N900) to Android 5.0 Lollipop (Leaked)

1: – First of all, connect your Galaxy Note 3 via its USB data cable with the PC.

2: – Now extract and transfer the downloaded ROM file (TWRP-LRX21V.N900XXUEBNL4-samsungviet.vn.zip) to the internal storage of your Galaxy Note 3.

3: – Extract the Odin flashing tool that you have downloaded from the above link, and run Odin as an administrator on your PC to flash TWRP (openrecovery-twrp-2.8.1.0-ha3g.img.tar) on your device.

4: – Next, boot your Galaxy Note 3 into recovery mode and perform a factory reset.

5: – Go back to the main recovery menu and tap on Restore, find the “2014-12-18–00-18-21 LRX21V.N900XXUEBNL4” file which you have downloaded from the above link. Select it.

6: – On the next screen, you’ll be asked to restore. Choose “Everything”.

7: – Once again return to the main menu in TWRP and tap on Reboot.

8: – Now tap on download mode and flash the Recovery + Bootloader 5.0 file (bootloader-recovery.tar) using Odin.

9: – Your device will now automatically reboot, it will take some time about 5 to 10 minutes to boot up for the first time after the above process.

10: – If you want to root this firmware on your Galaxy Note 3, then enter the Note into the Download Mode and flash the CWM Recovery (n900-cwm-recovery-6.0.5.0-kk_L5.0(0812).tar) using Odin flashing tool.

11: – Finally, boot the device into recovery and flash the SuperSu-2.40 ZIP file (UPDATE-SuperSU-v2.40.zip) and reboot.

Done! You’ve successfully updated Galaxy Note 3 (SM-N900) to Android 5.0 Lollipop via leaked OTA beta build and have root access to it now. Let us know in the comments section below if you are facing any problem or have a query in any step given above.

Source