In this guide, we are going to share the direct download link for KLU3AQFE Android 7.0 Nougat official firmware and instructions on how to update Galaxy Note FE N935L to KLU3AQFE Android 7.0 Nougat. This stock firmware update is available for Korean users having Galaxy Note FE N935L variants. The Note 7 was originally announced with Marshmallow and a bigger battery but the battery has shrunk and Samsung has updated the firmware version in Note FE. You can also find some new features taken from the Galaxy S8 line with this KLU3AQFE Android 7.0 Nougat update. If you want to experience these features all by yourself then proceed to flash the firmware immediately by following the given easy steps below.
If you are from Korea then just check with Samsung KIES / Smart Switch app or navigate to OTA (over-the-air) update system for automatic installation but if you are from any other region and can’t wait then you will be required to manually install Galaxy Note FE to N935LKLU3AQFE Android 7.0 Nougat version on your Galaxy Note FE. We’ll use Odin flashing tool to update Galaxy Note FE N935L to KLU3AQFE Android 7.0 Nougat official firmware. Before going ahead, create a proper backup of your Android apps and other phone data. Keep in mind that this firmware is completely unbranded and you can install it on any unlocked Galaxy Note FE N935L.
KLU3AQFE Android 7.0 Firmware Details:
Model SM-N935L
Country Korea (LG Uplus)
Version Android 7
Changelist 11617784
Build date Fri, 30 Jun 2017 04:13:10 +0000
Security Patch Level 2017-06-01
Product code LUC
PDA N935LKLU3AQFE
CSC N935LLUC3AQFE
Note:
This guide containing the Official Android 7.0 Nougat firmware and instructions can be used only with the Galaxy Note FE N935L. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device by navigating to Settings > About Phone, the model number of your device must be SM-N935L.
Warning:
AndroidBlog will not be held responsible for any damage occurred to your Samsung Galaxy Note FE N935L during or after the installation of Android 7.0 Nougat Proceed at your risk.
Pre-Requirements:
- Make a proper backup of all the existing data and settings of your Galaxy Note FE N935L, in case anything goes wrong then you’ll be able to restore your data back.
- Verify that you’ve correctly installed the Galaxy Note FE N935L USB Drivers on the PC.
- Enable USB Debugging Mode on your Galaxy Note FE N935L by navigating to Settings > Developer Options > check the USB Debugging option.
- If you have a custom ROM installed on the phone, then after installing this stock update, it will be lost.
- The stock version will replace the custom recovery.
- If the Galaxy Note FE N935L will no longer belong to a rooted version, once the stock firmware installed.
- Check the battery level of your Galaxy Note FE N935L, and it should be charged at least about 80% before proceeding to the installation guide.
Required Files:
- Download Android 7.0 N935LKLU3AQFE for Galaxy Note FE
- Download ODIN v3.10.7
Steps to Update Samsung Galaxy Note FE N935L to KLU3AQFE Official Android 7.0 Nougat:
Step No 1: – First, download Android 7.0 Nougat official udpate and Odin v3.10.7 for Galaxy Note FE N935L on the desktop of your PC.
Step No 2: – Now, extract the archived contents to get the tar.md5 update file. Don’t extract the tar.md5 firmware update file.
Step No 3: – Turn OFF your Galaxy Note FE N935L to boot into Download Mode.
Step No 4: – Turn the device ON by pressing and holding the Volume Down + Home+ Power keys at the same time for a while till the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.
Step No 5: – Launch Odin tool on your PC as an Administrator and plug your phone to your PC while your phone is in the Download Mode.
Step No 6: – One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.
Step No 7: – Select the firmware files tar.md5 that you want to flash on your Galaxy Note FE N935L. (Already extracted in Step No 1)
Click on ‘AP’ and select file with ‘AP’ in its name.
Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
Step No 8: – In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.
9: – Click on the Start button in Odin to start the installation process. It will take a few minutes.
Step No 10: – Once the installation process is successfully finished, the Galaxy Note FE N935L will restart. Unplug the phone after you see the home screen.
Done! You have successfully updated Samsung Galaxy Note FE N935L to Android 7.0 Nougat official firmware update.
Let us know in the comments area below if you have any issues or queries regarding the above given guide to flash XWU1AQF9 Android 7.0 Nougat on Galaxy Note FE N935L.
