TWRP and RootDownloadsHow To

Download And Install Unofficial TWRP Recovery On Galaxy S10e

Download and install unofficial TWRP recovery on Galaxy S10e: Recently, Samsung announced his best phone of 2019 known as Samsung Galaxy S10e. The smartphone comes with high specs and beautiful design along with One UI, which is based on Android Pie. Some users still can’t live with Samsung’s redesigned system and searching for the way to install custom ROM on their device. If you want to customize your device or flashing the custom firmware then the custom recovery is the first step. We are glad to report you that today we have the installation guide for unofficial TWRP recovery on Galaxy S10e.

Now the unofficial TWRP custom recovery is available for download and ready to install on your device. Here we share a simple and easy step by step guide on how to download and install unofficial TWRP recovery on Galaxy S10e. The TWRP is an open source custom recovery which provides a touchscreen-enabled interface. Once you can install TWRP recovery on Galaxy S10e. Then you will be able to flash third-party firmware and back up the current system, install Custom ROM, Kernel, Mods, functions often unsupported by stock recovery images, root any Android device, backup and restore any ROM and much more.

All thanks to the XDA Senior member geiti94 for sharing this amazing unofficial TWRP custom recovery. Android has one of the important contributions from the active developer community which is TWRP custom recovery. Before proceeding keep in mind that installing TWRP recovery can void your phone warranty. Take the full backup of all your phone important data. If you are interested in installing the unofficial TWRP recovery on Galaxy S10e. Then go ahead and follow the given steps.

TWRP recovery on Galaxy S10e
TWRP recovery on Galaxy S10e


This guide containing the root package and instructions can be used only with the Galaxy S10e. Check the model number of your phone if it is Galaxy S10e then go ahead, otherwise not. Do not use these instructions for any other device or incorrect variant.


AndroidBlog will not responsible for any damage occurred to your Galaxy S10e during or after the rooting process. Proceed at your risk.


  • It is highly recommended to make a proper backup of your contacts, messages, photos, videos and other valuable data on your phone.
  • The battery level of your phone should be at least up to 70% to avoid unexpected shutdowns while rooting.
  • Enable USB Debugging on your phone by navigating to Settings > Developer Options.
  • Download and install Samsung USB Drivers on your PC.

Required Files:

Steps to Install TWRP Recovery On Galaxy S10e:

Step No 1: – First, download the TWRP Package Odin tool (Odin v3.10.7) and SuperSU ( files on the desktop of your PC for Galaxy S10e.

Step No 2: – Copy/paste the SuperSU file to the internal storage of your device.

Step No 3: – Extract the TWRP file to get the file with .tar extension and Odin flashing tool also to get the Odin3_v3.10.7.exe file.

Step No 4: – Switch off the Galaxy S10e to boot into the Download Mode.

Step No 5: – Switch on the device while pressing and holding Volume UP + Home + Power buttons at the same time. Once a warning screen with a yellow triangle sign appears, press the Volume Up button to enter into Download Mode.

twrp recovery

Step No 6: – Run Odin as administrator on the PC.

Step No 7: – Connect the phone using its USB data cable with the PC.

Step No 8: – Once the Galaxy S10e is connected successfully with the PC, the ID: COM port will turn Blue on Odin, and you’ll see “Added!!” message.

Step No 9: – Click on the AP button in Odin and locate the firmware file that you have already extracted. Select it.

Step No 10: – Ensure that the Auto Reboot and F. Reset Time options are checked, and the Re-Partition option should be unchecked.

Step No 11: – Begin the TWRP installation by clicking on the Start button in Odin. This process may take a few minutes.

Step No 12: – A PASS! The message will be displayed on Odin after the TWRP installed successfully and the device will restart.

Step No 13: – Disconnect the device and turn it OFF to boot into TWRP recovery mode.

Step No 14: – Turn ON the phone by pressing and holding the Volume Up + Home + Power buttons altogether to boot into the TWRP recovery.

Step No 15: – Tap the Install button in TWRP and select the –

Step No 16: – After the installation is completed, reboot the system.

Done! These were the simple steps to install TWRP Recovery and Rooted your Galaxy S10e via Odin.

Let us know in the comments area below if you have any issues or questions.

Bhatti Junaid

He continuously writes tech articles and development code. Also, appreciates excellent food, exceptional coffee and great company. He has written 266 guides and other posts.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button