Now you can download and install the July 2020 security patch for Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 variants. Samsung is really working hard and releasing the July 2020 security patch for its latest devices nowadays before the new month is going to start. Samsung has released the July 2020 security patch for the Galaxy S20 series. Now the company extends the range of July 2020 security patch and has added three more devices. The Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 devices are started getting the July 2020 security patch via OTA update.
Here we have come with a step by step guide on how to download and install the July 2020 security patch for Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 variants. The most recent update comes with build number G97xFXXS7CTF3, F700FXXS2ATF3, and A505FNXXU5BTF5 along with the latest security patches. This latest official update comes with lots of new improvements, added some new features, many other customizations, and so on. Also, the update brings improved video stabilization, recording over Bluetooth microphones, camera enhancements in the zoom, fix bugs, improved camera quality, and much more.
Samsung started rolling out the July 2020 security patch for the Samsung Galaxy devices via OTA in phase-wise. So it may take some time to reach in all regions. If you have not yet received any notification of the new update and you are excited to upgrade your device, still you can install it manually. You can download the latest Samsung official firmware by using the Frija firmware download tool. Frija tool allows users to download the latest official stock firmware for Samsung phones.
Once you download the latest firmware for your device, you can flash it on the Samsung Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 with the help of the Odin flash tool. If you are interested in downloading and installing the July 2020 security patch for Galaxy S10, the Galaxy Z Flip, and the Galaxy A50, then go ahead and follow the given instructions.
Note:
This guide containing the official July 2020 Security firmware, and instructions are working with the Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series only. Do not try to install this firmware on any other device or incorrect variant. Verify the model number of your device before proceeding to the installation guide.
Warning:
AndroidBlog will not responsible for any kind of damage that occurred to your Samsung Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series during or after the installation of an official update. Proceed at your own risk.
Pre-Requirements:
- Make a proper backup of all the existing data and settings of your Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series; in case anything goes wrong, then you’ll be able to restore your data back.
- Verify that you’ve correctly installed the Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series USB Drivers on the PC.
- Enable USB Debugging Mode on your Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series by navigating to Settings > Developer Options > check the USB Debugging option.
- If you have a custom ROM installed on the phone, then after the installation of the stock update, it will be lost.
- The custom recovery will be replaced by the stock version.
- If the Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 series are rooted, then after installing the official firmware, it will no longer belong to a rooted version.
- Make sure that the battery level of your phone is about 70% to avoid unexpected shutdowns while installing the ROM.
All you need to check your respective device first.
Check for Software Update:
- Connect your device with a stable internet connection (Wi-Fi or data network).
- Navigate to Android app drawer and tap on Settings.
- Next, locate About Device and tap on it.
- Choose Software Update from About Device.
- Tap on Update option.
- If the update is available, then you can see an update, press OK to download and install.
- Once the download completes, your device will reboot to complete the installation process.
Download Official Update For Galaxy S10, the Galaxy Z Flip, and the Galaxy A50:
How To Install July 2020 Security Patch For Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 Official Firmware :
1:– First, download firmware and Odin v3.12.3 for the Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 on the desktop of your PC and extract the .zip files.
2:– Turn OFF your Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 to boot into Download Mode.
3:– Turn the device ON by pressing and holding the Volume Down + Home keys at the same time and then press the Power button until the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.
4:– Launch Odin tool on your PC as an Administrator and plug your phone into your PC while your phone is in the Download Mode.
5:– One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.
6:– Select the firmware files that you want to flash on your Galaxy S10, the Galaxy Z Flip, and the Galaxy A50. (Already extracted in Step No 1)
7:– In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.
8:– Click on the Start button in Odin to initiate the installation process. It will take a few minutes to complete.
9:– Once the process of installation successfully completes, the Galaxy S10, the Galaxy Z Flip, and the Galaxy A50 will restart. Unplug the phone after you see the home screen.
Done! These were the instructions to install an official update July 2020 security patch for Galaxy S10, the Galaxy Z Flip, and the Galaxy A50. Let us know in the comments area below if you have any questions or issues.
Source: XDA
